Gaoxin औद्योगिक पार्क, Guangming नई जोन, शेन्ज़ेन शहर, गुआंग्डोंग प्रांत, चीन | Angelwang66@126.com |
Place of Origin: | China |
ब्रांड नाम: | Enargy |
Model Number: | XD30-12DB15-PECW |
Minimum Order Quantity: | 1pcs |
---|---|
मूल्य: | Negotiation |
Delivery Time: | 1-8 Weeks |
Payment Terms: | Negotiation |
Supply Ability: | 1000Pcs/week |
हाई लाइट: | military power supplies,military dc-dc converter |
---|
DC-DC Converters 30W Output 15V XD30-12DB15-PECW
Features:
Wide input range: 9-36 V
Output power: 30W
High conversion efficiency: 90%
Line regulation to: ±1%
Load regulation to: ±1%
Input under-voltage lock-out
Output over-current protection
Hiccup mode short circuit protection
Output over-voltage protection
Enable (On/Off) Control
Isolation Voltage: 1500Vdc
Product Overview:
These DC-DC converter modules use advanced power processing, control and packaging technologies to provide the performance, flexibility, reliability and cost effectiveness of a mature power component. High
frequency Active Clamp switching provides high power density with low noise and high efficiency.
Electric Characteristics
1.1 Absolute Maximum Ratings
Parameter | Min | Typ | Max | Units | Notes |
Input Voltage | 80 | Vdc | Continuous, non-operating | ||
40 | Vdc | Continuous, operating | |||
80 | Vdc | Impulse voltage,<100ms,operating | |||
Isolation voltage | 2000 | Vdc | Input to output | ||
Operating Temperature | -55 | 100 | ℃ | In view of PCB Temperature | |
Storage Temperature | -65 | 115 | ℃ | ||
Enable to -Vin Voltage | -2 | 10 | Vdc |
1.2 Input Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Operating input voltage range | 9 | 28 | 36 | Vdc | |
Start voltage range | 10 | 28 | 36 | Vdc | |
Input Under-Voltage Lockout | 8.5 | 8.9 | Vdc | Recovery point | |
7.5 | 8.0 | Vdc | Protect point | ||
Maximum Input Current | 4.2 | A | Vin min,output full load | ||
Efficiency | 89 | % | Rated input;rated load | ||
Dissipation,Standby | W | No load |
1.3 Output Characteristics
Parameter | Min | Typ | Max | Units | Notes | |
Output Voltage Set point | +14.85 | +15.00 | +15.15 | Vdc | +Vout | Rated input voltage;Small load |
-14.50 | -15.00 | -15.50 | Vdc | -Vout | ||
Output Voltage Range | +14.80 | +15.00 | +15.20 | Vdc | +Vout | |
-14.40 | -15.00 | -15.60 | Vdc | -Vout | ||
Output Current Range | 0.2 | 1.0 | A | +Vout | ||
0.2 | 1.0 | A | -Vout | |||
Voltage Regulation | ±1 | % | +Vout | |||
±4 | % | -Vout | ||||
Load Regulation | ±1 | % | +Vout | |||
±4 | % | -Vout | ||||
Output over-current protection |
1.2 | A | +Vout | 90% of the rated output voltage | ||
1.2 | A | -Vout | ||||
Output Short Circui Current | 0 | 5.0 | A | +Vout | ||
0 | 5.0 | A | -Vout | |||
RMS | 15 | mV | +Vout |
Nominal input; full load; 20MHz,bandwidth |
||
15 | mV | -Vout | ||||
Peak-to-peak | 70 | mV | +Vout | |||
70 | mV | -Vout | ||||
Capacitive load from the machine |
1800 | μF | +Vout | |||
1800 | μF | -Vout |
1.4 Dynamic Response Characteristics
Parameter | Min | Typ | Max | Units | Notes | |
Change in Output Current | 400 | mV | +Vout | Load change50%~75%~50% Ioutmax,di/dt= 0.1A/μS | ||
450 | -Vout | |||||
400 | mV | +Vout | Load change50%~75%~50% Ioutmax,di/dt= 0.5A/μS | |||
450 | -Vout | |||||
Dynamic recovery time | 300 | uS | ||||
5 | mS | Starting from vin to vout rise to 90% | ||||
5 | % |
1.5 Functional Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Switching Frequency | 180 | 200 | 230 | KHz | |
Enable PIN Current | 1 | mA | |||
Enable (ON/OFF) | 1 | 15 | Vdc | ON-control, Logic high or floating | |
-0.5 | 0.3 | Vdc | OFF-control,Logic low | ||
Over-Voltage Protection | 110 | 130 | % | Small load | |
Over-Load Protection | 110 | % | Current mode,Pulse current(100% rated load) | ||
Short-Circuit Protection | 65 | mΩ | Hiccup mode,since the recovery |
1.6 Isolation Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Isolation Voltage | 1500 | Vdc | Input to Output | ||
1500 | Vdc | In to base | |||
500 | Vdc | Out to base | |||
Isolation Resistance | 100 | MΩ |
At 500VDC to test it when atmospheric pressure and R.H. is 90% |
||
Isolation Capacitance | 1000 | pF |
General Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Weight | 50 | g | |||
MTBF | 1 | MHrs |
TR-NWT-000332; 80% load,300LFM, 40℃ Ta |
Environmental Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Operating Temperature | -55 | 100 | ℃ | Extended, base PCB temperature | |
Storage Temperature | -65 | 115 | ℃ | Ambient | |
Temperature Coefficient | ±0.02 | %/℃ | |||
Humidity | 20 | 95 | %R.H. |
Standards Compliance
Parameter | Notes |
MIL-STD-704 | |
MIL-STD-1399 | |
MIL-STD-810 | |
UL/cUL60950 | |
EN60950 | |
GB4943 | |
IEC 61000-4-2 |
5. WORK WAVE
Figure 1: Efficiency at nominal output voltage vs. load
current for minimum, nominal, and maximum input
voltage at 25°C.
Figure 2: Efficiency at nominal output voltage and 60%
rated power vs. airflow rate for ambient air
temperatures of 25°C.
Figure 3: Maximum output power derating curves vs.
ambient air temperature for airflow rates of 0 LFM
through 400 LFM with air flowing from pin 1 to pin 3
(nominal input voltage).
Figure 4: Output voltage ripple at nominal input voltage
and rated load current (20 mV/div). Load capacitance:
0.1μF ceramic capacitor and 10μF tantalum capacitor.
Bandwidth: 20 MHz.
Figure 5: Thermal plot of converter at full load
current(30W) with 25°C air flowing at the rate of
200 LFM. Air is flowing across the converter
from pin 3 to pin 1 (nominal input voltage).
Figure 6: Thermal plot of converter at full load
current(30W) with 25°C air flowing at the rate of
200 LFM. Air is flowing across the converter
from input to output (nominal input voltage).
Figure 7: Turn-on transient at full load (resistive load)
(10 ms/div).Input voltage pre-applied.
Ch1: Vout+(10V/div);Ch2:Vout-(10V/div)
Ch3: ON/OFF Input (1V/div)
Figure 8: Shut-down fall time at full load (10 ms/div).
Ch1: Vout+(10V/div);Ch2: Vout-(10V/div)
Ch3: ON/OFF Input (1V/div)
Figure 9: Output voltage response to step-change in
load current (50%-75%-50% of Iout(max); dI/dt =
0.5A/μs). Load cap: 10μF, 100 mΩ ESR tantalum
capacitor and 0.1μF ceramic capacitor. Ch 1: Vout
(200mV/div).
Figure 10: Output voltage response to step-change in load
current (50%-75%-50% of Iout(max): dI/dt = 0.5A/μs).
Load cap: 10μF, 30 mΩ ESR tantalum capacitor and
0.1μF ceramic cap. Ch 1: Vout(200mV/div).
6.Physical Information
6.1 Mechanical Outline
Notes:
1. All pins are 1.02mm dia.
2. Tolerances: x.x ±0.5mm, x.xx ±0.25mm
6.2 Pin Designations
Pin No. | Name | Function |
1 | Enable | TTL input to turn converter on and off, referenced to Vin(-), with internal pull up. |
2 | Vin(-) | Negative input voltage |
3 | Vin(+) | Positive input voltage |
4 | Vout(+) | Positive output voltage |
5 | Com | Ground |
6 | Vout(-) | Negative output voltage |
व्यक्ति से संपर्क करें: Miss. Angel
दूरभाष: 1598940345
फैक्स: 86-755-3697544
सामान्य सिम एडाप्टर काले प्लास्टिक 3FF माइक्रो, लघु 500pcs एक polybag में
सेल फोन के लिए सामान्य सिम एडाप्टर के लिए मानक प्लास्टिक ABS माइक्रो
सामान्य मोबाइल के लिए मानक सिम एडाप्टर के लिए गरम बेचना माइक्रो सिम
प्लास्टिक ABS नैनो सिम एडाप्टर, IPhone 4 नैनो सिम कार्ड अडैप्टर
नैनो 4FF के साथ काले IPhone 5 नैनो सिम एडाप्टर - 3FF
अनोखा IPhone5 नैनो सिम एडाप्टर प्लास्टिक ABS मिनी कार्ड नैनो
4FF - 3FF सिम एडाप्टर, नैनो के लिए माइक्रो सिम अडैप्टर 500pcs एक polybag में
प्लास्टिक ABS 3FF माइक्रो सिम एडाप्टर के लिए IPhone 4 या IPhone 5
नैनो प्लास्टिक 2 1 कॉम्बो माइक्रो सिम अडैप्टर में IPhone 5 1.2 x 0.9cm के लिए