Gaoxin औद्योगिक पार्क, Guangming नई जोन, शेन्ज़ेन शहर, गुआंग्डोंग प्रांत, चीन | Angelwang66@126.com |
Place of Origin: | China |
ब्रांड नाम: | Enargy |
Model Number: | YN100-24DB15-PEC |
Minimum Order Quantity: | 1pcs |
---|---|
मूल्य: | Negotiation |
Delivery Time: | 1-8 Weeks |
Payment Terms: | Negotiation |
Supply Ability: | 1000Pcs/week |
हाई लाइट: | isolated dc dc converter,high power dc dc converter |
---|
DC-DC Converters 100W Output 15V YN100-24DB15-PEC
Key Features
Output power: 100W
Wide input range: 18-36Vdc
High conversion efficiency: Up to 91%
Line regulation to ±1%
Load regulation to ±1%
Isolation voltage :1500V
Enable (ON/OFF) control
Output over-Current protection
Hiccup mode short circuit protection
Over-temperature protection
Input under-voltage lock-out
Product Overview
These DC-DC converter modules use advanced power
processing, control and packaging technologies to provide
the performance, flexibility, reliability and cost effectiveness
of a mature power component. High frequency Active Clamp
switching provides high power density with low noise and
high efficiency.
1. Electric Characteristics
1.1 Absolute Maximum Ratings
Parameter | Min | Typ | Max | Units | Notes |
Input Voltage | 40 | Vdc | Continuous, non-operating | ||
38 | Vdc | Continuous, operating | |||
40 | Vdc | Operating transient protection,<100mS | |||
Isolation Voltage | 2000 | Vdc | Input to Output | ||
Operating Temperature | -40 | 100 | ℃ | In view of PCB Temperature | |
Storage Temperature | -55 | 105 | ℃ | ||
Enable to -Vin Voltage | -0.5 | 10 | Vdc |
1.2 Input Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Input Voltage Range | 18 | 24 | 36 | Vdc | |
Under-Voltage Lockout | 17.5 | 17.9 | Vdc | Recovery point | |
15.5 | 16.5 | Vdc | Protect point | ||
Maximum Input Current | 6.8 | A | Vin min,Output full load | ||
Efficiency | 90 | % | Rated input;Rated load | ||
Dissipation,standby | 12 | W | No Load |
1.3 Output Characteristics
Parameter | Min | Typ | Max | Units | Notes | |
Output Voltage Set point | 14.85 | 15 | 15.15 | Vdc | +Vout | Rated input voltage,No load |
-14.85 | -15 | -15.15 | Vdc | -Vout | ||
Output Voltage Range | 14.55 | 15 | 15.45 | Vdc | +Vout | Rated input voltage, load |
-14.55 | -15 | -15.45 | Vdc | -Vout | ||
Output Current Range | 0 | 3.33 | A | +Vout | Two at the same time increase the load | |
0 | 3.33 | A | -Vout | |||
Line Regulation | ±0.5 | ±1 | % | +Vout | Two at the same time increase the load | |
±0.5 | ±1 | % | -Vout | |||
Load Regulation | ±0.5 | ±1 | % | +Vout | Two at the same time increase the load | |
±0.5 | ±1 | % | -Vout | |||
Output over-Current protection |
3.5 | 4 | 4.4 | A | +Vout | 95% of the rated output voltage,Load |
3.5 | 4 | 4.4 | A | -Vout | ||
Short Circuit Current | 4 | A | +Vout | Two simultaneous short-circuit | ||
4 | A | -Vout | ||||
Ripple (RMS) | 100 | mV | +Vout |
Nominal input; full load; 20 MHz bandwidth. |
||
100 | mV | -Vout | ||||
Noise(Peak-to-Peak) | 150 | mV | +Vout | |||
150 | mV | -Vout | ||||
Capacitive load from themachine |
2200 | μF | +Vout | |||
2200 | μF | -Vout |
1.4 Dynamic Response Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Change In Output Current | 480 | mV |
50% to 75% to 50% Iout max; (di/dt= 0.1A/μs) |
||
600 | mV |
50% to 75% to 50% Iout max; (di/dt= 2.5A/μs) |
|||
Dynamic recovery time | 300 | μS | |||
Turn-on Time | 30 | mS | Starting from vin to vout rise to 90% | ||
Turn-off overshoot | 5 | mS |
1.5 Functional Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Switching Frequency | 187 | 230 | 255 | KHz | |
Enable Current | 10 | mA | |||
Enable (ON/OFF) | 3.5 | 10 | Vdc | ON-control, Logic high or floating | |
-0.5 | 0.5 | Vdc | OFF-control, Logic low | ||
Over-Load Protection | 105 | 115 | 130 | % | Current mode,Pulse current(100% rared load) |
Short circuit protection | 65 | mΩ | Hiccup mode,since the recovery | ||
Over- Temperature Protection | 105 | ℃ | Protect point,In view of PCB Temperature | ||
90 | ℃ | Recovery point |
1.6 Isolation Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Isolation Voltage | 1500 | Vdc | Input to Output | ||
1500 | Vdc | Input to Base | |||
500 | Vdc | Output to Base | |||
Isolation Resistance | 100 | MΩ |
At 500Vdc to test it when atmospheric pressure and R.H. is 90% |
||
Isolation Capacitance | 1000 | pF |
2. General Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Weight | 2.8(80) | Oz (g) | |||
MTBF ( calculated ) | 1 | MHrs |
TR-NWT-000332; 80% load,300LFM, 40℃ Ta |
3. Environmental Characteristics
Parameter | Min | Typ | Max | Units | Notes |
Operating Temperature | -40 | 100 | ℃ | base PCB temperature | |
Storage Temperature | -55 | 105 | ℃ | Ambient | |
Temperature Coefficient | ±0.02 | %/℃ | |||
Humidity | 20 | 95 | %R.H. |
4. Standards Compliance
Parameter | Notes |
MIL-STD-704 | |
MIL-STD-1399 | |
MIL-STD-810 | |
UL/cUL60950 | |
EN60950 | |
GB4943 | |
IEC 61000-4-2 |
5. Typical Wave And Curves
Figure 1: Efficiency at nominal output voltage vs.
load current for minimum, nominal, and maximum
input voltage at 25°C.
Figure 2: Efficiency at nominal output voltage and 60%
rated power vs. airflow rate for ambient air temperatures of
25°C, 40°C, and 55°C (nominal input voltage).
Figure 3: Maximum output power derating curves vs.
ambient air temperature for airflow rates of 0 LFM through
400 LFM with air flowing from pin 3 to pin 1 (nominal input
voltage).
Figure 4: Output voltage ripple at nominal input
voltage and rated load current (20 mV/div). Load
capacitance: 0.1μF ceramic capacitor and 10μF tantalum
capacitor. Bandwidth: 20 MHz.
Figure 5: Thermal plot of converter at full load
current(150W) with 25°C air flowing at the rate of
200 LFM. Air is flowing across the converter from
pin 3 to pin 1 (nominal input voltage).
Figure 6: Thermal plot of converter at full load
current(150W) with 25°C air flowing at the rate of
200 LFM. Air is flowing across the converter from
input to output (nominal input voltage).
Figure 7: Turn-on transient at full load (resistive load)
(20ms/div).Input voltage pre-applied.
Ch1:Vout (10V/div);Ch2:ON/OFF Input (2V/div)
Figure 8: Shut-down fall time at full load (40 ms/div).
Ch1:Vout (10V/div);Ch2:ON/OFF Input (2V/div)
Figure 9: Output voltage response to step-change in
load current (50%-75%-50% of Iout(max); dI/dt =
0.1A/μs). Load cap: 10μF, 100 mΩ ESR tantalum
capacitor and 0.1μF ceramic capacitor. Ch1: Vout+
(200mV/div),Ch2: Vout- (200mV/div).
Figure 10: Output voltage response to step-change in load
current (50%-75%-50% of Iout(max): dI/dt = 2.5A/μs). Load
cap: 470μF, 30 mW ESR tantalum capacitor and 0.1μF ceramic
cap. Ch1: Vout+ (200mV/div),Ch2: Vout- (200mV/div).
6. Physical Information
6.1 Mechanical Outline
Notes:
1. Pins 4, 6 are 1.52mm dia. with 2.16mm dia.
2. Pins 1-3 are 1.02mm dia. with 1.65mm dia.
3. Tolerances: x.x ±0.5mm.x.xx ±0.25mm
6.2 Pin Designations
Pin No. | Name | Function |
1 | Vin(+) | Positive input voltage |
2 | Enable | TTL input to turn converter on and off, referenced to Vin(-), with internal pull up. |
3 | Vin(-) | Negative input voltage |
4 | Vout(-) | Negative output voltage |
5 | Com | Ground |
6 | Vout(+) | Positive output voltage |
व्यक्ति से संपर्क करें: Miss. Angel
दूरभाष: 1598940345
फैक्स: 86-755-3697544
सामान्य सिम एडाप्टर काले प्लास्टिक 3FF माइक्रो, लघु 500pcs एक polybag में
सेल फोन के लिए सामान्य सिम एडाप्टर के लिए मानक प्लास्टिक ABS माइक्रो
सामान्य मोबाइल के लिए मानक सिम एडाप्टर के लिए गरम बेचना माइक्रो सिम
प्लास्टिक ABS नैनो सिम एडाप्टर, IPhone 4 नैनो सिम कार्ड अडैप्टर
नैनो 4FF के साथ काले IPhone 5 नैनो सिम एडाप्टर - 3FF
अनोखा IPhone5 नैनो सिम एडाप्टर प्लास्टिक ABS मिनी कार्ड नैनो
4FF - 3FF सिम एडाप्टर, नैनो के लिए माइक्रो सिम अडैप्टर 500pcs एक polybag में
प्लास्टिक ABS 3FF माइक्रो सिम एडाप्टर के लिए IPhone 4 या IPhone 5
नैनो प्लास्टिक 2 1 कॉम्बो माइक्रो सिम अडैप्टर में IPhone 5 1.2 x 0.9cm के लिए